| Description |
Features |
Image |
| LiNbO3 Mach-Zehnder modulator (MZM) with a RF driver |
|
|
| Nested, fully integrated I/Q MZM |
- For advanced 40 Gb/s DQPSK transmission (20 Gbaud per channel)
- Based on GaAs technology
|
 |
| LiNbO3 phase modulator |
- Up to 12 GHz bandwidth
- Polarization maintaining fiber (PMF) at both input/output optical ports
|
 |
| Ultrafast InGaAs PIN photo-detector |
- 50 GHz bandwidth
- Loaded with 50 ?
- Responsivity of 0.6 A/W at 1550nm
|
|
| RF amplifiers |
- 24 dB of Gain and flat response
- 5-20 GHz bandwidth
|
 |
| Double-balanced mixers |
- IF port up to 10 GHz
- LO/RF ports from 9 to 20 GHz
|
|
Bias Tee
|
- 20 kHz – 45 GHz
- 400 mA max. current
- Max. DC voltaje of 16V
|
 |
| 2 way-0º power splitter |
- Resistive
- From DC to 18 GHz
|
|
| Voltage controlled oscillator (VCO) |
- Frequency output from 12 to 18 GHz
|
|
Waveguide-integrated balanced photo-detectors
4 pairs |
- Pairs on a single chip
- Integrated 50 ? termination
- 3 dB cut-off frequency of 42 GHz
- Responsibity of 0.6 A/W at 1550nm
|
 |
Ultra Linear modulator drivers
8 units |
- 23-24 dB of Gain
- Bandwidth from 60-70 KHz to 40-55 GHz
|
|
| 90º optical Hybrid |
- Two single polarization
- Enabling to extract phase, amplitude and polarization from signal
- Local Oscillator (LO) port has PMF
|
 |
| Digital to Analog Converter (DAC) with 4 channels |
- 55-65 GSa/s
- 8-bit resolution
- 2xIQ pairs
- >13 GHz output bandwidth
- 8-bit x 256K samples memory per channel
|
 |
EDFA programmable (Pre/Booster) modules
|
- 22 dB programmable Gain
- C-Band
- Up to 20 dBm output power
- 1% output monitor
|
 |
Ti:LiNbO3 DP-QPSK Single-Drive MZM
|
- Modulation speed of up to 31.4 GBaud (23 GHz bandwidth)
- Comprises 3 dB coupler, two QPSK modulators, polarization rotator, polarization beam combiner (PMC) and built-in monitor PD chips for automatic bias control
|
 |
Small-Form-Factor LiNbO3 intensity modulator
|
- 0-40 GHz
- X-cut (zero chirp)
- Low Vpi
|
 |
Pulse carver LN intensity modulator
|
- 40 GHz
- 40 Gb/s single electrode
- Zero chirp
- Low Vpi
|
 |
Low Drive Voltage LiNbO3 MZM
|
- 40 Gb/s NRZ
- Ti diffused LiNbO3 waveguide technology
|
 |
Fiber pigtailed Acousto Optic modulators (AOM) with fixed frequency drivers
2 units |
- For 1550nm
- 300 mW maximum optical power
- +100 MHz frequency shift and non-frequency shift
- 100 nsec Rise time
|
 |
| Optical table |
- 1.5 m x 2.5 m x 210 mm surface
- M6 x 1.0 mounting holes with metric disposition
- Passive isolation system
|
 |
